Shoes made of leather. Leather shoes come in a variety of designs, from boots to sneakers, and are ideal for wet days. However, no matter how long-lasting or attractive they are, they can become worn and unsightly with time. Isn’t it something you do not want to happen? Knowing how to protect leather shoes that will ensure that they look great and last a long time.
How to protect Leather Shoes & Boots Get That Wet
When your leather shoes or boots become wet, it’s critical to treat them with care to avoid lasting damage to the leather. To get the best results, follow these step-by-step instructions for treating wet leather shoes and boots. If you are not sure then you can always visit the shoe repair service shop near London.
Can Leather Shoes & Boots Get Wet?
Yes. If you care for your leather shoes and boots properly, they can become wet (even extremely wet in some situations) without causing permanent harm. If your leather shoes are being soaked on a frequent basis, consider investing in a pair of waterproof shoes to avoid having to treat them as often. Shoe repair shops can help you to protect your leather shoes.
Ways To Dry Wet Leather Shoes
Step 1: Remove Excess Moisture & Debris
To protect your leather shoes remove any excess water from the shoe’s outside first. If there are any raindrops on the shoe, wipe it down with a clean, dry towel to remove them and avoid water stains. Make careful to remove any dirt, mud, or grit while your shoes are still wet, rather than allowing the debris to dry.
Step 2: Remove The Laces
Leather shoes typically include cotton or other natural fibre laces. Instead of trapping moisture between the two components, removing them will allow both the laces and the shoes to dry faster.
Step 3: Remove The Insoles
If your shoes are genuinely saturated, moisture is most likely trapped between the insole and the shoe’s bottom. To protect leather shoes removing the insoles helps the shoe to breathe properly, reducing the possibility of the shoes stinking or warping later. After removing the insoles, wipe any excess moisture from the inside of the shoe using a soft, dry towel.
Step 4: Elevate The Shoes
If you leave your shoes on the floor, moisture will collect between the outsole and the floor. Clean the outsoles with a damp cloth to remove grit and dirt, then elevate the shoes to allow the outsoles to air and dry. You may use a mesh shoe rack, place the shoes on their side, or lean them against a wall with a towel below.
Step 5: Stuff Them With Crumpled Newspaper
When your shoes or boots are damp, stuffing them with newspaper comes in handy. The best way to protect your leather shoes is to use dry newspaper that will absorb moisture from the leather and pull it out. Newspapers are quite effective, but it is also a time-consuming procedure. It’s critical to remove the wet newspaper and replace it with dry newspaper until all of the moisture has been absorbed. Otherwise, moisture will be trapped between the wet newspaper and the leather, negating the purpose. The initial round of newspaper will absorb a lot of water from wet shoes and will need to be changed fast (within 20 minutes). Because there is less moisture available to absorb, subsequent rounds of newsprint will take longer.
Step 6: Elevate & Air Dry
Your shoes will still be damp after a while, but the crumpled newspaper trick will no longer work since there isn’t enough moisture left to soak effectively. At this stage, air drying the shoe is the greatest option for removing any remaining moisture. Place the shoes or boots in a cool, dry location with little humidity and moisture. Excessive heat will cause the leather to dry out too rapidly, causing it to distort and fracture.
Water Damage On Leather Shoes
After your shoes have dried, inspect them for any spots that appear to be out of place; there may be salt stains or water marks that will require extra treatment. When the shoes are damp, they may not be apparent, but as the leather dries, they may become evident. To remove salt stains, use a vinegar solution and wash off the leather with a cloth. Talcum powder can be used to remove stains caused by oil or grease.
Shoe Trees
Shoe trees can be put inside leather shoes once they have completely dried to help them keep their form. Cedar is commonly used for shoe trees because of its moisture-wicking properties (and also its pleasant scent).
Check For Various Services
It’s also crucial to look at the range of maintenance facilities that a shoe repair service shop provides. As a result, you’ll have a better understanding of what other options the repair shop can provide.
However, if you don’t want to spend time looking for a boot or shoe repair shop in London Prime Laundry can assist you in the right manner. Give the Prime Laundry team a call to hear more about our programmes, please contact us at [email protected] or call us at (+44) 798-437-5336.
