If your Roku TV remote needs to be fixed, don’t panic. It can be a problem with batteries, TV is not connected to the correct input, the remote is not correctly paired with your Roku TV, or anything is interfering with the signal between your Roku TV and the Remote. But don’t worry, you can troubleshoot these problems. Want to know how? Read the below steps.
Corroded or no power batteries:
If your Roku TV remote is not working, it could be due to corroded or no power batteries. To troubleshoot this issue, follow these steps:
- Remove the batteries from the remote and inspect them for corrosion. If the batteries are corroded, clean them with a cotton swab dipped in vinegar.
- If the batteries are not corroded, try replacing them with new ones.
- If the remote still needs to be fixed, check that the power cord is plugged correctly into the Roku TV and outlet.
- If the power cord is plugged in correctly and the remote still does not work, reset the Roku TV by unplugging it from the power outlet for about 30 seconds and then plug it back.
Check the Roku TV: Is it turned on and connected to the correct input?
If your Roku remote is not working, you should first check whether the TV is turned on or connected to the correct input. If it is, then check if the batteries are in the remote. If they’re low, try replacing them with fresh batteries. If that doesn’t work, you can try a few other things, like resetting the Roku TV or factory resetting the remote.
Check the remote: Is it paired correctly with the Roku TV?
If your Roku TV remote isn’t working, you should first check that it is correctly paired with the Roku TV. To do this, open Roku TV’s main menu and select “Settings.” Then, under “Devices,” select “Remote Control.” You will find a list of all devices paired with your Roku TV. If your remote is not on this list, select “Pair new device” and follow the instructions.
If your remote is correctly paired with your Roku TV but isn’t working, you can try a few other things.
- First, ensure no obstructions between the Roku remote and the TV. If there are, move them out of the way.
- Second, try resetting the remote by removing the batteries and reinserting them.
Check if anything is interfering with the signal
If yourRoku TV remote isn’t working, you can check a few things to see if anything is interfering with the signal between TV and remote.
- First, ensure nothing is blocking the infrared sensor in front of the TV. The Roku TV remote uses infrared signals to communicate with the TV, so anything that blocks those signals can prevent the remote from working.
- Next, try moving closer to the TV. The Roku TV remote has a limited range, so if you’re too far away from the TV, it won’t work.
- Finally, check to see if any other electronic devices nearby could interfere with the signal. Things like microwaves and cordless phones can sometimes cause interference. If there is something causing interference, try moving it away from the TV or unplugging it entirely.
With these troubleshooting tips, you should be able to get your Roku TV remote working again in no time! But, if you’re still having trouble with your Roku TV remote, visit the Roku remote not working for more help.
