Hot tub installation is much easier than you might think. Getting it up and running shouldn’t take long after you’ve selected the place and done the necessary preparations. Before your hot tub is delivered, you’ll want to be sure the ground it will sit on is suitable and whether or not you’ll need to get planning permission. You may learn everything you need to know about building a hot tub here.
Step 1: Buy the perfect hot tub
In most cases, hot tubs can be delivered to your home by shops. You or the delivery staff should be able to simply carry the hot tub to the prepared foundation if the path to its final location is clean and free of obstructions.
Step 2: Place the hot tub at the appropriate location
To avoid the hassle of having to drain your hot tub and start over somewhere else, be sure the position of your hot tub is perfect before moving forward.
Step 3: Set up the hot tub
The owner’s manual that comes with your hot tub as example, the manual of Celtic Spas provides a detailed instructed guide on how to assemble it. Although installing a hot tub is rather straightforward, you should read the handbook carefully to avoid hurting your new investment. Depending on the system’s intricacy, you may have to enlist the services of another electrician to complete this stage of connecting your hot tub to your power supply.
Step 4: Fill your hot tub
For the next stage, make sure you’re following your manual’s instructions exactly. You may fill your hot tub with water from your garden hose. Be on the lookout for any leaks that may emerge when the hot tub is being filled with water. As a general rule, you should also: turn off the electricity, Clean the hot tub’s interior. The jets, knobs, and controls should be checked and prepared for use. Open the air vents.
Step 5: Time to turn on!
Start the tub’s heating system. This could take some time. While it’s heating up, cover your hot tub with a tarp.
Step 7: Incorporate sanitizing agents
Add the correct sanitizing chemicals to the water while the tub is heating up. Safety instructions on the chemical bottles should always be followed. Before you use your hot tub, ensure the chemicals are balanced with a water test kit.
Step 7: Have fun in your new hot tub!
Your new hot tub won’t be ready for use for four to eight hours, at the latest (100 to 106 degrees Fahrenheit). You may also want to wait a day to check that your water’s chemicals are in balance and that any chlorine levels are safe. It’s important to remember that chlorine isn’t the only sanitizing agent on the market. After filling your hot tub, you should be able to begin using it within 12 to 24 hours.
Can a hot tub go in a shed or summer house?
A shed or summer cottage can hold a hot tub, thus the answer is yes. Even on rainy days, you’re more likely to use your hot tub if it’s enclosed, and it also gives you more privacy. They can also help to keep the tub warm. To avoid damage to the enclosure from the steam, make sure the area is large enough and well-ventilated. A power source is also required. Pop-up tent gazebos, on the other hand, are ideal for those who are on a tight budget and prefer to store their gazebos while they’re not in use.