What is hydro excavation? It is a process mostly used by miners to excavate soil without having to cause any damage to the utilities through the use of pressurized water. The system has gained popularity for its efficiency in different regions with the cold areas resorting to hot but pressurized water to get the job done. Hydro excavation Sydney is also called non-destructive excavation and has a wide range of benefits that will be highlighted below. Initially, traditional excavation methods were used, for instance use of backhoes for groundbreaking and applying hand tools to dig for minerals, however the amount of destruction caused was not ignorable. Find out here why most mining companies opt for the hydro excavation method of mining and digging today.
Does not require a lot of labor
Traditional excavation methods were heavily reliant on the availability of a sufficient labor force to get most of its objectives attained. It instead became more costly to pay the labor force for the risky work done aside from increasing the general cost of operation should any emergencies happen. Hydro excavation mostly employs the use of machinery to get the work done and that cuts down the number of employees that you should have on the site. It consequentially lowers the cost of operation for the company allowing room for maximum profits.
Safest method to use
Initially, excavation was all about the quality of labor and digging tools you could get besides the use of explosives and backhoes to get the work done. Workers in the area were much more susceptible to injuries as a result of flying rocks and landslides that were the aftermath of such unscrupulous methods. Companies involved in the process had to find better ways of safeguarding not just their employees but resources like machinery too through the introduction of hydro excavators. Hydro excavators tend to use unique extensions to channel water into the underground which means the staff will be at a safe distance controlling the process.
Much faster
Speed is an important factor in any project, especially those involving mining. It allows for faster completion of the project hence making it cost-effective and that is exactly what hydro excavators seek to achieve. Considering the elimination of digging and dumping of debris, the method tends to be faster, thanks to the suction caused by the hydro excavator vacuuming process. The sucked dust and debris are absorbed into the tank of the hydro excavator for later dumping according to regulations set by the local authority.
Amplified precision and efficiency
There are some areas where traditional excavation methods cannot be used due to the tight spaces involved. Overlooking the restrictions set by the local authorities could see the company face a number of lawsuits. Such areas are best mined or excavated using hydro excavation methods that allow the places to remain intact with very few backfilling and repairs needed once the procedure is complete. Companies need to consult with local authorities over the right methods to use in different areas to amplify chances of success without much friction.
Environmental friendly
From the word hydro one can tell that the entire system is reliant on water as the primary tool besides the machinery used. The method has proven to be resourceful in keeping the land surface as it was, considering no digging is done, unlike the traditional excavation methods that left major pits in the environment. It was majorly resorted to minimize the adverse effect of traditional excavation and mining on the environment.
