WD 40 is a spray that serves us for several purposes in our domestic homes. This spray is a popular penetrating oil and water displacing spray, recognized by the famous colors of blue and yellow. It is commonly believed to be effective in dealing with bees that depend on Carpenter Woods for habitat by killing them.
Many people find it difficult to get an idea of the killing of these bees in Carpenter Woods. This article introduces you to carpenter bees and their lifestyle. The blog post below shows an effective chemical trap and precaution that can be used in repelling these bees from your homes and gardens and has no harm to humans or pets. We have discovered a method and ways to put it into practice. Read more to know how to make these bees stay away from you and find ways and means to trap them to stay away from your homes, where they are already living.
What are Carpenter Bees?
Carpenter bees are large, black bees that frequently hover about the exterior of their homes. Their carpenter-related name derives from their propensity for burrowing holes in wood, where they raise their offspring. Carpenter bee adults overwinter in brood tunnels that they have built themselves.
Those who survive the winter successfully emerge and mate the following spring. As a result, we will see them near our valuable wood, generally in the spring. Later in the summer, a new generation of adult bees develops in the environment and on flower forages. They’ll hibernate in the woods in the fall.
What is WD-40?
WD 40 is the name of a water-displacing spray product, possibly used for killing bees that are destroying your wood. It is an oily substance with very low lubricant and penetrating properties. WD 40 is also a petroleum base and contains minerals like oil, carbon dioxide, and aliphatic hydrocarbons.
WD-40 also acts as an adhesive and cleaner. It usually prevents corrosion, rust, and frost on metal tools. Because it works well, it is often used in many homes.
Does WD40 Kill Carpenter Bees Effectively?
Of course, yes, WD-40 kills carpenter bees, and just like other insects, if they come in contact with your woods, WD-40 also contains a collection of mineral spirits, which is very harmful in killing insects within roughly 5 minutes. However, WD-40 is also harmful to humans, so it is advised to kindly stay away from children that might not be seen around.
How To Eliminate Carpenter Bees Using WD40
WD-40 applied directly to bored carpenter bee holes or directly to carpenter bees has been shown to be relatively successful in eradicating carpenter bees and aids in carpenter bee elimination by discouraging them. To be safe, avoid using the spray near an open flame and avoid ingesting or spraying the liquid into your eyes.
Follower the method below to get rid of Carpenter bees by using WD 40
- Pest Repellent:
Carpenter bees and other insect pests are also deterred from attacking surfaces by WD-40. However, being a light oil, it is very volatile and leaves minimal residue. As a result, it may not be particularly effective as a repellent over a lengthy period of time. It may, however, be effective as an insecticide.
Carpenter bees have a keen sense of smell, which they use to identify nectar-producing flowers. Strong-smelling compounds, like varnish, paint, or WD-40, might interfere with their olfactory receptors. These compounds, when applied to wood surfaces, may deter carpenter bees from building nests around your house. Deterring carpenter bees with WD-40 is an effective way to get rid of carpenter bees without killing them.
- Makeshift Pesticide:
WD-40 is an oil-based insecticide that may kill carpenter bees and other insect pests. It disrupts the bee’s respiratory system when it comes into touch with it. This acts by restricting the free passage of oxygen and closing its air pores. As a consequence, the trachea becomes blocked, and the bee dies of asphyxiation.
How to Apply WD-40
1. Find and identify infected areas in wood.
Carpenter bee nest openings are almost spherical in form and roughly a half-inch in diameter. Carpenter bees like softwood nesting materials such as cedar, pine, oak, and redwood. They also eat wooden structures, including doorposts, railings, roof eaves, and decks. Carpenter bees may also infest unpainted or untreated wood. Keep an eye out for carpenter bees buzzing over your buildings and check any holes you detect.
2. Place the WD-40 extension tube into the carpenter bee hole
The WD-40 aerosol can come with a straw-like extension that may be used to administer the spray in small areas. Spray the WD-40 into the hole and insert the extension as far as it will go. Spray WD-40 into the interior holes for at least 10-20 seconds. The extra WD-40 will leak out through the hole due to the pressure caused by the small hole. Make sure to wipe up any WD-40 liquid that has spilled on the ground or any other non-wood surface.
Because the adult bee is most likely to be resting in the nest hole in the evenings, this treatment is best performed in the evenings.
3. Shut Nest Holes
Spraying the nest openings with WD-40 and quickly closing them will reduce airflow in the nest. The bees will then be killed more quickly. After spraying, seal the hole with wood putty or caulking clay.
Preventing Carpenter Bee Attacks with WD-40
Identify Pre-existing Holes
Look for holes and fissures in your wood construction that might be attacked. Cover it with little wooden dowels, caulking, or wood putty.
Apply WD-40 on unstained or untreated wooden surfaces
Carpenter bees may be deterred from infesting wood by using WD-40. It may also be used to keep other insect pests away from your hardwood surfaces. Carpenter bees avoid your wooden surfaces to help carpenter bees.
WD-40 is one of the most efficient carpenter bee repellents. Carpenter bees are poisoned by WD-40, a common petroleum-based lubricant. It has elements that may repel or kill them. Spray it into infected holes and cover them up to kill the bees and keep them from attacking again. Also, before using it, take the necessary safety measures.
WD-40 is a petroleum-based substance that may be caustic and trigger allergic reactions in certain people. As a result, you must use extreme caution while handling the product. Put on safety goggles and hand gloves to keep droplets out of your eyes and off your hands.
You may also prevent breathing it in by using a face mask. Keep WD-40 away from open flames; it is combustible and may spark fires.