7 Safety Measures a Construction Site Must Have

Working on a construction site is not an easy job at all because it is one of the riskiest jobs. Construction workers work high up in a building, operate large and mobile equipment, work near around edges, and deep holes, and work on lobby stairs. If the safety measures of your worksite are not ensured by the manager then you must take a certain action. Because one little mistake and you can be badly injured on a worksite as a construction worker.

7 safety measures a construction site must have –

1. Safety Training

No workers should be employed on a construction site without safety training. Each worker should complete site-specific induction training so that they can point out if there are any high-risk areas. This is how they can also provide instructions for emergency management. Only by providing safety training, the possibility of accidents can be reduced.

2. Personal Protective Equipment (PPE)

It is quite important for every worker to wear Personal Protective Equipment (PPE). Because they often face many kinds of construction accidents. These hazards include injury to the eyes, limbs, and other body parts, mechanical and electrical hazards, and even worker fatalities. To minimize these injuries, the workers should wear gloves, safety goggles, knee pads, hard hats, earmuffs, respirators, and vests whenever needed. These little safety measures can eliminate many injuries.

3. Keep the Area Clean

Every worker should maintain a clean and tidy workspace throughout their shift. Make sure that the area should be without clutter and well arranged. Store tools, materials, and equipment correctly. The manager of a construction site should ensure that there are garbage receptacles or trash bins placed regularly throughout the site. Pay particular attention to areas such as access and escape routes.

4. Safety Signs

The safety signs should be clearly displayed at the construction site. This will ensure that all safety protocols are readily available. With the safety signs there should be a 24 hour emergency contact number and a map or directions to the site office. Your employer should ensure a risk assessment is carried out for your activities. You must read it and understand it.

5. Ladder Safety

Another major safety issue which does concern a construction manager is ladder safety. The ladder must be strong, tight, dry, and free from corrosion and other damages. It should always be taller than the destination of the climber. It should always be cleaned. There should be fall protection for every climb.

6. Right Tools And Equipment

Because of using incorrect tools, accidents like – electrocution in construction sites often happen. Also using one tool for multiple jobs is not only inefficient but also could be hazardous. Using the correct tool for the job will get it done quicker, and most importantly, safer. Before you start you should visually check all the equipment if they are in good and safe condition or not.

7. First Aid Kit

Both a contractor and a site supervisor should also have a first aid kit readily available for their workers as it may not be possible for workers to carry their own first aid kit everywhere. Using the first aid kit, workers with minor burns, cuts, or who suffer a minor fall can often be treated immediately and can return back to work right away. To prevent infections from developing, it’s important to treat minor injuries quickly.